Send EmailSend Email

SGM Lab Solutions

Complete Lab Solution

SGM Lab Solutions

SGM Lab SolutionsSGM Lab SolutionsSGM Lab Solutions


Home » Calibration Services

Calibration Services

We are involved in offering Calibration and Testing Services with the help of highly accurate calibration equipment, trained & experienced team and perfect environmental conditions. These services are provided in accordance with IS/ISO/IEC-17025, with the assurance of high measurement accuracy and low uncertainty.

Our trained and experienced staff of 25 personnel are fully capable of executing these services with the assistance of various measuring instruments.

Following instruments are taken up for the calibration:
  • Thermal Instruments are used for the measurement of Temperature
  • Mass Instruments are used for the measurement of volume and weight
  • Pressure instruments are used for the measurement of pressure
  • Force instruments are used for the measurement of torque
  • Electrical instruments
  • Miscellaneous instruments

Following Parameters are taken up for calibration:
Oven Refrigerator
Humidity Chamber Thermocouple
Incubator RTD Sensor
Deep Freezer Temp. & Humidity Indicator
Hot Plate Temp. Indicator
Muffle Furnace Data Logger with Sensor
Water Bath Laser Gun(up to 400 deg. C.)
Glass Thermometer Laser Gun(up to 1200 deg. C.)

Do You Want to Enquire for this Service ?

Yes! I am interested

Volumetric Glassware UTM(2000KN)
Balance(upto 100 kg.) Pressure Gauge
Weights(F1 class per piece)F2M1M2 Vaccum Gauge
Micrometer(upto 50mm) Stop Watch/Timer
Vernier Caliper(upto 300mm) CTM(1000KN)
Measuring Scale(upto 5mtr) Weights(M1,M2 class per piece)
Steel Scale(upto 3mtr)

Ampere Meter Clamp Meter
Volt Meter LCR Meter
Watt Meter Technometer
Milli Ampere Meter Frequency Meter
Micro Ohm Meter Turn Ratio Meter
Power Factor Meter Insulation Tester
Power Analyser KV Meter
Multi Meter Sound Level Meter

Electric Pressure Calibrator

Electric Pressure Calibrator
Electric Pressure Calibrator provides pressure calibration using the programmable pump limit settings that eliminate over-pressurization.

Forget the Hassle of Hand Pumping
Now you can calibrate and test pressure devices quickly and easily with one hand, saving valuable time. With the innovative, built-in electric pump, 719 Electric Pressure Calibrator provides pressure calibration at your fingertips!Use the programmable pump limit settings to eliminate over-pressurization, and to set ‘pump to’ pressure values. The unique cleanout port design reduces pump failures, and makes the 719 easy to clean without repair. The compact, lightweight form, combined with one-handed calibration, makes this pressure calibrator the ideal tool for busy process professionals.

  • Electric pump for one handed pressure calibration
  • Best in class pressure measurement uncertainty of 0.025%
  • Measure and source mA with best in class 0.015% accuracy
  • Precision pressure adjust vernier for accurate pressure calibration
  • Variable release rate bleed valve for easy pressure adjustment
  • Ideal performance for high accuracy transmitter calibration
  • 30 psi and 100 psi pressure ranges
  • Programmable pressure calibrator pump limit:
  • eliminates over-pressurization
  • allows the user to program target pressures for pumping
  • Extended pressure measurement range with any of 29 700Pxx Pressure Modules
  • Source mA with simultaneous pressure measurement to test valves and I/Ps
  • Simulate mA signals to troubleshoot 4-20 mA loops
  • Test pressure switches with built in switch test function
  • Power transmitters during test using 24 V loop supply with simultaneous mA measurement
  • Pressure Calibrator includes proven cleanout ports reduce pump failures

Storage temperature -30°C to 60°C
Operating temperature -10°C to 55°C
Relative humidity 95% (-10°C to 30°C)
75% (30°C to 40°C)
45% (40°C to 50°C)
35% (50°C to 55°C)
Shock 1 meter drop test
Safety CSA C22.2 No. 1010.1:1992
EMC EN50082-1:1992 and EN55022:1994 Class B
Size (H x W x L) 60 x 87 x 210 mm (2.19 x 3.41 x 8.28 in)
Weight 912 g (2 lb)
Battery Two 9 V alkaline batteries
Battery life 12 hours with 12 mA into 500 Ω, 200 pump cycles to 100 psi, 500 pump cycles to 30 psi

Do You Want to Enquire for this Service ?

Yes! I am interested

RTD Process Calibrator

RTD Process Calibrator
For the temperature calibration professional that wants a highly accurate, easy-to-use, single function RTD temperature calibrator the Fluke 712B is the ideal test tool.

  • The 712B can measure and simulate (13) different RTD types and resistance
  • Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal Hanging tool designed in and included with every unit
  • Configurable 0 % and 100 % source settings for quick 25 % linearity checks
  • ramp and 25 % step auto ramp based on 0 % and 100 % settings
  • inputs and backlit display for easy interpretation of measurements
  • Power down settings remembered at power up for easy restart of tests
  • 1-year and 2-year specifications and traceable certification of calibration

Maximum voltage applied between any terminal and earth ground or between any two terminals30 V
Operating temperature -10°C to 50°C
Storage temperature-30 °C to 60 °C
Operating altitude2,000 meters
Storage altitude 12,000 meters
Relative humidity (% RH operating without condensation)Non condensing
90% (10 °C to 30 °C)
75% (30 °C to 40 °C)
45% (40 °C to 50 °C)
(Without condensation)
Vibration requirementsMIL-T-28800E, Class 2
Drop text requirements 1 meter
IP RatingIEC 60529: IP52
Electromagnetic environment IEC 61326-1, Portable

Do You Want to Enquire for this Service ?

Yes! I am interested


Follow Us on :


SGM Lab Solutions. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?


Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name