Fiber Optic Test Equipments

Product Details:

The SAT-8C Cable Fault Locator is used for locating the faults like localization of break, cross and poor electric insulation in telephone cables, coaxial cables and other high frequency cables. It works on advanced electronic measurement technology, which integrates with megohmmeter, ATDR, automatic bridge and resistance meter. The instrument is used while construction and line maintenance in the telecom industry.

Features:

• Model No:- SAT 8C
• Pulse reflection and intelligent bridge testing method with full-automatic and manual testing functions.
• Testing for insulation resistance and loop resistance. Insulation reach up to 50 MΩ.
• Automatically judge the line state: break, cross, poor electric insulation and the high voltage.
• DAGC (Digital Automatic Gain Control) and DWAR (Digital Waveform Automatic Recognize), it can automatically judge the wave form.
• Field calibration function correct speed and line diameter parameter of unknown cable, correct length of known cable, automatic store the correction factor).
• Default 0.32mm, 0.4mm, 0.5mm, 0.6mm’s telephone cables.
• Store 10 testing waveforms, and upload results to PC, reviewing analyzing and printing.
• Two waveforms comparison function
• With USB interface.
• Built-in lithium battery, and its working 6 hours.

Pulse reflection:

• Testing accuracy: 1 m for measurement range = 2 km
• Accuracy ±2% 8 m for measurement range = 2 km
• Accuracy ±2%
• Testing dead zone: 0 m
• Pulse width: 60ns-10µs automatic adjustment
• VOP: 0 ~ 300 m /µs
• Impedance 135 Ω ( accuracy 1% )

Bridge testing method:

• Poor insulation resistance: 0~50?O
• Testing length: Full length 9999m Sectional 9999m×3 sections
• Testing error: 1% × Full length of line With megohmmeter and ohmmeter’s functions

DMM Technical index:

• Insulation resistance: 0 ~ 50?O Minimum resolution: 10 kO, accuracy: ±3%
• Loop resistance: 0 ~ 9 kO. Minimum resolution: 0.1 O, accuracy: ±3%
• Voltage: AC/DC voltage 0 ~ 250V. Minimum resolution: 0.1V, accuracy: ±5%
• Capacitance: 0-1.3uF. Minimum resolution: 1nF, accuracy: ±5%

Power Supply:

• AC Power: External AC power supply / Charger
• Battery: Built-in 2Ah lithium-ion rechargeable battery
• Working time:6 hours
• Charging time: 4 hours

Physical parameters:

• Screen: 640 x 480 pixels and TFT touch color screen With USB and RJ11 interface

Product Details:

Optical Power Meter is a compact sized model, which works with double-color encapsulation technology. These are very easy to operate and maintain and these are controlled with single-chip microprocessor. These are widely used for optical installation, maintenance, communication, sensor and optical CATV. Besides, these are acclaimed for ergonomic design and robustness.

Features:

• Detector: InGaAS
• RS232 interface, data could be uploaded to PC for analysis
• 4.5Bit LCD display, multi-unit display modes for shift: nW, uW, mW, dBm, dB
• Automatic range switching; Automatic turn-off, time setting range: 5~60 mins; Automatic reset.
• Multi wavelength measurement, Auto frequency identifying: 270Hz, 1kHz, 2kHz.
• Setting serial number for instrument and instrument self calibration function.
• Low power alarming.
• Real-time Data monitoring function by PC.

What are thje features of fiber optic test equipments?:

• Cost-effective, rugged and high performance solution
• 3 year recalibration period
• Universal wavelength setting in 1 nm steps
• Universal optical interface supports all 2.5 mm and
• 1.25 mm connectors
• Auto λ detection and TwinTest mode
• Internal data storage and optional PC download capability

Additional Information:

• Item Code: SAT4E11

Product Details:

Features:

• Complete functions, easy operation
• High sensitivity and reliability
• Highly accurate measurement is used in the field and laboratory
• Test the optical transmission system, attenuation and fiber
• Be compatible with other optical instruments
• Low battery alarm
• LCD display
• High Sensitivity, Multi Output Power
• Multi Wavelength Optional, up to Four Wavelengths on Two Ports
• Automatic Power Off, Off Time Setting Range 20 – 90 minutes
• Low Battery Alarm
• New Type Conductive Rubber Switch, Suitable for Different Operation Environments

Additional Information:

• Item Code: SAT-3E

Product Details:

Optical Laser Source is very easy to use, control and maintain. These are microprocessor based instruments admired for ergonomic design and consistent performance. These are manufactured using latest techniques and following international industrial standard. Optical laser source ensures accurate measurement and excellent performance.

General characteristics:

• Model No:- SAT 3E
• Complete functions, easy operation
• Multi wavelength Optional, up to Four Wavelengths on Two Ports
• Auto Power Off, Off Time setting range 20-90minutes
• High sensitivity and reliability
• Highly accurate measurement is used in the field and laboratory
• Test the optical transmission system, attenuation and fiber
• Be compatible with other optical instruments
• Low battery alarm

Features:

• Cost-effective, rugged and compact solution
• Interchangeable connectors for maximum flexibility available
• Auto λ and Twin Test transmission modes
• 3 year calibration
• Combines up to 4 wavelengths in one instrument (SM+MM)

Technical Specifications:

Product Details:

Handheld OTDR is manufactured as per international standard and available in three different measuring models including manual mode (including real time mode and average mode), auto mode and dead zone mode. These find their wide applications to measure the physical characteristics of optical fiber under test, including length, the splice loss and the transmission loss. These are especially designed to locate the faults of breaks of optical fiber. Handheld OTDR are designed to offer three wavelengths and VLF in one handheld unit, and also for testing passive optical network (PON) in FTTx. These are straightened with comfortable Gallus which make these very convenient to carry.

Features:

• Model No:- SAT 18C
• Handheld, lightweight and convenience for carrying
• The most advanced technology of double-color & material integrative mould in trade.
• Advanced anti-reflective TFT LCD, visible clearly in field
• 1.6 m extra-short event dead zone
• Communication light check automatically
• 0.25m high resolution, 65534 sampling points
• Fast auto measurement, one button operating
• Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync
• Supporting Bellcore GR196 file format in writing or reading
• Function of intelligent indicating of remaining capacity of battery and warning if the voltage of battery is low.
• Built –in lithium battery with high capacity for over 10 hours of operating life
• Visible fault locating (VFL)
• Unique function of updating system on-line, returning to factory is unnecessary

Product Details:

Optical Cable Identifier In the pipeline, channel, well and overhead environments, use single core optical fiver to accurately identify far-end cables; machine room construction, pipeline reform, cable cutting and connecting, regular management, resource survey and on-duty and maintenance of communication operators

Features:

• Small size, portable design, touch screen and shortcut keys
• Orientate the target cable by loop back far-end knocking test with single fiber or single-double fiber
• Strong on-spot application capacity can meet the demands of accurately searching the target cable when looking over the directly-buried cable and pipe cables or cutting cables
• Monitor the mechanical vibration conditions of the far-end cables
• Orientate the target cable through audio or visible signal in a comprehensive environment
• Optimize the equipment parameters automatically and applicable to testing lines with different length
• VFL port, orientate the target cable accurately
• Large capacity polymer lithium battery, provides long working time

Additional Information:

• Item Code: SAT-210

Product Details:

Features:

• Handheld, light weight and convenient for carrying
• The most advanced technology of double-colour and material integrative mould in aspect
• Advanced anti-reflective TFT LCD display can be clearly seen in field
• Auto test, manual test and real time test
• Speed curve analysis and multiple curves comparison
• 1.6m extra short event dead zone
• Visual fault locating (VFL)
• Universal FC/SC/ST connector type, convenient for surface cleaning
• USB interface supports USB flash disk to transfer data
• SC card interface supports SC card to transfer data
• Machine memory can save 1000 data, support manual and auto save data
• Support bellcare GR196 and SR4731 format
• Battery status indication and low battery power alarming
• Automatic turn-off, turn off time can be adjusted

Additional Information:

• Item Code: SAT-18C

Product Details:

Fiber Optic Test Equipments are especially designed to meet the test related specific demands of laboratories. These are engineered for fiber optic test. These are manufactured as per international industrial standard and under the firm direction of expert quality controllers. These are available in various range and technical specifications as per the precise demands and requirements of clients.


What are thje features of fiber optic test equipments:

• Cost-effective, rugged and high performance solution
• Auto λ detection and TwinTest mode
• Internal data storage and optional PC download capability

Product Details:

 Optical Power Meter Handheld with easy operation, control with single-chip microprocessor, applicable for optical installation, maintenance, communication, an ergonomic design and double-colour encapsulation technology

Features:

• Automatic multi wavelength switching
• Automatic turn-off,
• Automatic Zero clearing
• Low battery power alarming

Additional Information:

• Item Code: SAT-4E

Product Details:

Building Diagnostic Thermal Imager Ultra sleek, intelligent design meets the performance you need for building diagnostics. Searching for air leaks, hidden moisture, construction defects, or other building issues? TiR105 Thermal Imager delivers a huge competitive advantage—it allows you to work faster, more efficiently and document your findings right away.

Find and report problem areas to your clients right away with peace of mind:

• Feel: Ultra-sleek design developed for building diagnostic applications makes driving your thermal imager safe, easy and more fun.
• Technology helps identify problem areas and torch to assist in illuminating dark spaces.
• Report: Included SmartView® software assisting you to document your findings and customize your reports

Features:

• Experience the ultra-sleek intelligent design developed for you - rugged, ergonomic, lightweight, point–and–shoot, focus-free imager
• Find air leaks, hidden moisture, construction defects, or other building issues faster and easier with IR-Fusion® technology
• Capture current measurements fast and conveniently from up to five wireless modules at once using your thermal imager and CNX wireless modules.
• Use both Picture-in-Picture, Full Visible and Full Infrared for reporting and validation of work
• Illuminate dark places such as electrical cabinets and poorly lit mechanical rooms with integrated torch
• Show where the problems exist with the laser pointer
• Enjoy non-stop thermal imaging with field replaceable battery

 

General Specifications:

Additional Information:

• Item Code: TiR105