Viscosity Standards

Product Details:

Stability Chamber are designed according to the ICH guidelines Q1 A (R2), WHO, MCA, and USFDA requirements. They are superior in Air Flow Distribution, Temperature and Humidity Recovery, Controlled Technology, Cabinet Construction and are known for its Accuracy, Uniformity, Reliability and Economy. The Chambers are manufactured as per the cGMP Regulations and designed to give low electrical and water consumptions.

 

Features:

• Construction: Double wall, with PUF insulation, outer door key lockable, inner glass viewing door.
• Microprocessor-based PID controller with auto tuning for accurate control of temperature and humidity conditions and printer interface facility to store data and to print it directly on a printer with variable print time interval.
• Exterior: Stainless Steel (304 Grade)
• Low Water level cut off for humidity system
• Feet: Castor wheels
• Trays: SS wire mesh heavy duty
• Air circulation: Flange Motor with Impeller and blower.
• Interior Illumination for working Area

Specifications:

• Humidity range: 25% to 95% RH, Accuracy +/- 3% RH, Uniformity +/- 3% RH
• Temperature Display: Digital LED 3 ½ digit, Resolution 0.1 deg C
• Humidity Display: Digital LED 3 ½ digit, Resolution 1% RH
• Heating system: U shaped Nichrome wire heater in SS Sheathing.
• Cooling system: Hermetically sealed CFC free Emerson compressor with R 134a refrigerant
• Humidity system: Non condensing type steam injection system with water level arrangement with insulation to save heat energy
• Customized Temperature and humidity ranges are also available on request.

Product Details:

CONOSTAN® certified mineral oil viscosity standards were developed for various visco meters in conformation with ASTM D2162 standards. The standards are traceable in accordance with National Standards and ASTM & IP methods. With a stability guarantee of up to 2 years the determination of kinematic and dynamic viscosity values were made as per ASTM D445/446 and ISO 3104/3105 and are traceable with NIST.

Additional Information:

• Item Code: C12

Product Details:

The CANNON viscosity standards are in conformation with ASTM D 445/446 and ISO 3104/3105 and are traceable to NIST (National Institute of Standards and Technology). These standards are certified in CANNON's ISO 9001 registered and A2LA-accredited laboratory. The CANNON laboratory is accredited by A2LA for technical competence in calibration with certificate number 1262.01. The accreditation is provided to determine the kinematic and dynamic viscosity including viscosity standards and customer samples in conformation with ISO/IEC 17025. The calibrations are based upon the procedures detailed in ASTM D 2162. NIST delegated CANNON to issue measurement and calibration certificates and providing U.S. National Measurement Standards. Viscosities for all standards sold by CANNON are based on the NIST value of 1.0016 mPas (centipoise) for water at 20°C (68°F).


For Use With (Application) For calibration and verification procedures:

• Approximate Viscosity in mPa•s (cP) at 20 °C/68 °F N/A
• Approximate Viscosity in mPa•s (cP) at 25 °C/77 °F 1400
• Approximate Viscosity in mPa•s (cP) at 40 °C/104 °F N/A
• Approximate Viscosity in mPa•s (cP) at 60 °C/140 °F 140
• Approximate Viscosity in mPa•s (cP) at 135°C / 275°F N/A
• Kinematic Viscosity mm2/s(cSt) at 60°C/ 140°F 160
• Kinematic Viscosity mm2/s(cSt) at 100°C/212°F N/A
• Kinematic Viscosity mm2/s(cSt) at 135°C/275°F 12
• Product Rating(1-5 Only) 3

Additional Information:

• Item Code: C13

Product Details:

The viscosity standards are the certified standards meant for calibration and verification procedures that are used for all types of viscometers. The verification made using certified viscosity standards ensure the reliability of measurements made with glass capillary viscometers, rotational viscometers, falling ball viscometers, cup viscometers and many more.

For Use With (Application) For calibration and verification procedures:

• Approximate Viscosity in mPa•s (cP) at 20 °C/68 °F    N/A
• Approximate Viscosity in mPa•s (cP) at 25 °C/77 °F    1400
• Approximate Viscosity in mPa•s (cP) at 40 °C/104 °F    N/A
• Approximate Viscosity in mPa•s (cP) at 60 °C/140 °F    140
• Approximate Viscosity in mPa•s (cP) at 135°C / 275°F    N/A
• Kinematic Viscosity mm2/s(cSt) at 60°C/ 140°F    160
• Kinematic Viscosity mm2/s(cSt) at 100°C/212°F    N/A
• Kinematic Viscosity mm2/s(cSt) at 135°C/275°F    12
• Product Rating(1-5 Only)    3

Product Details:

• Big Ultra Bright Backlight LCD Display
• Direct Reading On Display
• Auto Range Function
• Temperature Display
• Printer & Computer Interface
• Data Logger Software (Optional) Not Applicable In WDV- 8